The Basic Functionality of a High Pressure Washer

The Basic Functionality of a High Pressure Washer

A high pressure washer is basically a machine which, via a high-pressure spray water jet, lifts off dirt and sludge from any hard solid surface. Water running from a domestic water supply (up to 2 bar pressure) is repeatedly pressed (or sprayed) through a high-pressure nozzle on a pedestal, thereby succeeding in disintegration and removal of the dirt present on the surface in question.

The water which has been sprayed is also pumped back into the domestic water system. This process is repeated a number of times, depending on the size of the piece of equipment being used. Often, up to six or eight cycles are required to clean the most difficult surfaces, look at here now to learn more.

  1. To start the process, the high-pressure washer pump is switched on.
  2. The motor then pumps a high volume (high pressure) water hose through the hose assembly to initiate the spray.
  3. A separate high-pressure washer hose is then attached to the pump and connected to the nozzle.
  4. Once the high-pressure washer pump is switched on, the water flow rate is increased and the hose/pump assembly is placed within the reach of the nozzle.
  5. Initially, the water flows at a very high velocity through the hose assembly.
  6. Then, the nozzle is guided by the electric motor to the desired location on the surface, usually on the underside of the piece of equipment.
  7. The motor helps to guide the nozzle onto the dirt strip or other object. The dirt is released through the hose/pump assembly, and the electric motor mechanically drives the washer blade (the rotating part of the machine) over the scrubbed areas to remove the debris.
  8. The high-pressure washer, in combination with proper cleaning methods, offers a long-life service for any type of application. They can also provide excellent cleaning in a shorter period of time than their electric cousins.
  9. The lower flow rate associated with the electric models makes them impractical for use on surfaces that are subject to heavy-duty use.
  10. For commercial and industrial cleaning applications, the high-pressure washer can be operated with the nozzle removed and the motor disconnected.
  11. This allows complete control of the cleaning process, including controlling the flow rate, and the distance of the blades from the nozzle. Further, with this option the motor can operate at higher temperatures and pressures than would be practical with the attachment of an electric unit.